Do I have cavity walls? How to check your walls
Before you look into any insulation grant, it helps to know what your outside walls are made of. Cavity or solid walls change which work is suitable and what a surveyor will look for. You can usually get a strong indication yourself, without tools, from the brickwork, a door or window opening and your Energy Performance Certificate.
We are an independent information and enquiry site. We do not fit insulation, and nothing here replaces a proper survey. If you are unsure after checking, we reply by email.
What a cavity wall is
A cavity wall is an outside wall built as two separate layers, or leaves, of masonry with a gap between them. The outer leaf faces the weather and the inner leaf faces the rooms inside. The two are tied together with metal ties across the gap. That gap is the cavity, and it is the space that cavity wall insulation fills.
A solid wall has no such gap. It is built as one thick piece of masonry, with bricks laid across the wall to bond it together. Solid walls cannot take cavity fill. They can be insulated from the inside or the outside, but that is a different job with different risks.
Check one: look at the brick pattern
Stand outside and look at how the bricks are laid on a wall that has not been rendered or painted.
Long faces only
If every brick shows its long side, laid end to end with the joints staggered, that is the usual cavity wall pattern. The outer leaf is one brick deep, so you only see long faces.
Short ends mixed in
If you can see the short ends of bricks appearing in the face of the wall, mixed in with the long sides, that is a sign the bricks run through the wall to bind a solid wall together. The Cavity Insulation Guarantee Agency (CIGA) puts it simply: "end bricks in the face suggests that the wall may not contain a cavity" (CIGA: cavity wall insulation FAQs).
This is a guide, not proof. Render, cladding or paint can hide the pattern, and extensions may be built differently from the main house, so check each wall you can see.
Check two: wall thickness at a door or window reveal
The second check is to look at how thick the wall is. The easiest place to do this is a reveal: the exposed edge of the wall around an outside door or a window opening, where you can see from the outside face to the inside face.
Stand in an open external doorway and compare the depth of the wall with an internal wall in the same house. A cavity wall, with its two leaves and the gap, is noticeably deeper than a solid wall. If it looks about as thick as a single brick laid across its length, that points towards a solid wall.
Treat this as a comparison, not a measurement. Plaster and dry lining can change how deep a reveal looks, so use it alongside the brick pattern.
Check three: your EPC on the register
If your home has an Energy Performance Certificate, it will usually describe the walls. Search your address on the gov.uk find an energy certificate service and look at the section that lists the main features of the property. The wall entry normally says whether the walls are cavity or solid, and whether they are insulated, partially insulated or uninsulated as assumed by the assessor.
The EPC is useful but not perfect. Assessors sometimes record assumptions, and a certificate can be out of date. If it disagrees with what you see, mention both when you ask for advice.
The certificate also shows your energy rating, which matters for grants. Most of the routes still open refer to homes rated EPC D to G.
Has the cavity already been filled?
Before anyone suggests filling a cavity, check whether it has already been done.
- Look for drill-hole patches in the mortar. Cavity insulation is usually blown in through holes drilled into the mortar joints, which are then filled. Look along the walls for a regular pattern of small, round patches in the mortar that are a slightly different colour or texture from the joints around them.
- Check your paperwork. If cavity insulation was fitted by a registered installer, it may come with an independent CIGA guarantee. CIGA guarantees are transferable when a home is sold and remain valid for later owners, so a previous owner or your conveyancing papers may hold one.
- Ask CIGA. If you think a guarantee exists but cannot find it, CIGA can issue a duplicate guarantee when you email guarantees@ciga.co.uk with proof of ownership and a recent utility bill.
What you see and what it likely means
| What you see | What it likely means | Next step |
|---|---|---|
| Only the long faces of bricks, joints staggered | Probably a cavity wall | Check the reveal and the EPC to confirm |
| Short brick ends showing in the face of the wall | The wall may not contain a cavity (CIGA) | Treat as possibly solid; get a survey before any work |
| External wall noticeably deeper than an internal wall at the reveal | Points towards a cavity | Compare with the brick pattern |
| External wall about the depth of one brick laid across | Points towards a solid wall | Read the gov.uk quality notice below before considering solid wall insulation |
| Regular small patches in the mortar joints | The cavity has probably already been filled | Look for a CIGA guarantee; do not refill without advice |
| Render, cladding or paint hiding the bricks | Cannot tell from outside | Rely on the EPC and a survey |
| EPC lists cavity walls with no insulation, marked as assumed | Likely an unfilled cavity, but not confirmed | Check for drill-hole patches before assuming |
Why it matters for grants now
The Great British Insulation Scheme ended on 31 March 2026, and its gov.uk eligibility checker has closed. GBIS mostly funded single insulation measures (Ofgem: Great British Insulation Scheme; gov.uk: Great British Insulation Scheme). Now the scheme has ended, our guide to what replaced the Great British Insulation Scheme sets out the routes running now.
Knowing your wall type helps whichever route you try: the Warm Homes: Local Grant in England (privately owned homes rated EPC D to G, household income usually £36,000 or less, or certain postcode areas or benefits), ECO4 until 31 December 2026 (mainly benefit-led; apply through your supplier or ask your council whether it takes part), Home Energy Scotland, or Nest in Wales.
Whatever route you use, a registered installer should assess whether the wall is suitable before any cavity is filled. CIGA notes that the installer assesses suitability first.
Solid walls and the gov.uk quality notice
If your checks point to solid walls, take care. Gov.uk has said there were "quality issues with some solid wall insulation fitted through" GBIS. Its guidance on what to do if you have poor-quality wall insulation, updated 18 February 2025, covers solid wall insulation fitted through GBIS or ECO4. The main points are:
- Ofgem is writing to affected properties, and the letter carries a Unique Measure Reference.
- For internal wall insulation, normally no action is needed, but contact Ofgem if you are concerned.
- Every home with external wall insulation is being offered a home check.
- Faulty work is to be fixed by the installer, and you should not be asked to pay.
- Contact may come from Ofgem, TrustMark and the installer's certification body. A separate complaint goes through the TrustMark complaints process.
If existing cavity insulation seems to be causing problems
If your cavity has been filled and you now see damp or staining, CIGA suggests first checking obvious outside causes, such as blocked gutters or earth piled against the walls. If the problem remains, contact the installer first, then CIGA if it is not resolved (CIGA: consumer concerns). Claims must be notified within 25 years of installation, and a guarantee is not valid if the insulation has been altered or disturbed. Where extraction is being considered, our page on cavity wall insulation removal explains the process.
Frequently asked questions
How can I tell if my house has cavity walls?
Look at the brick pattern, compare the wall depth at a door or window reveal with an internal wall, and read the wall entry on your EPC. If you see only the long faces of bricks and the external wall is noticeably deeper, a cavity is likely.
What does it mean if I can see the ends of bricks in the wall?
CIGA says end bricks in the face suggest the wall may not contain a cavity. That usually points to a solid wall, which cannot take cavity fill.
How do I know if my cavity walls are already insulated?
Look for a regular pattern of small filled patches in the mortar joints, check the EPC wall entry and look for a CIGA guarantee in your paperwork. CIGA guarantees are transferable when a home is sold, and CIGA can issue a duplicate guarantee.
Can I still get cavity wall insulation through GBIS?
No. GBIS ended on 31 March 2026 and the gov.uk eligibility checker has closed. Routes still running include the Warm Homes: Local Grant in England, ECO4 until 31 December 2026, Home Energy Scotland and Nest in Wales.
I have solid wall insulation fitted through GBIS. What should I do?
Read the gov.uk guidance on poor-quality wall insulation. Ofgem is writing to affected properties, every home with external wall insulation is being offered a home check, and faulty work should be fixed by the installer without you being asked to pay.
Not sure what your walls mean for a grant?
Once you know whether you have cavity or solid walls, the next question is which route fits your home. Use the after-GBIS checker; we reply by email, and we will point you to the scheme and the page that matches your situation.
Sources: CIGA, gov.uk, Ofgem, Home Energy Scotland and gov.wales pages linked above (read 19 October 2026).
Ask us about your home
Tell us your question and postcode. We reply by email.
Published 2026-10-19. Independent guide; scheme rules change, so confirm with the scheme before you rely on them.